[. . . ] Quick Guide Cappuccinatore To prevent accidents and machine damage read the instructions provided with the machine. en - US, CA M. -Nr. 07 382 380 Cappuccinatore Milk spout Before using the cappuccinatore for the first time, wash it either in the dishwasher or with hot water and liquid dish soap. Cold milk is best for creating froth. [. . . ] ^ Place the cappuccinatore under the steam valve. ^ Fill the cappuccinatore a to the upper "max" mark with cold milk and cover with the lid. ^ Place the cappuccinatore under the steam valve and a cup under the spout b. The steam lever must click into the down position - otherwise the valve is not properly connected to the cappuccinatore. If the steam stops and there is not enough froth prepared, push the steam lever up then down again. ^ Slowly press the steam lever down a. The steam lever must click into the down position - otherwise the valve is not properly connected to the cappuccinatore b. ^ Push the steam lever up when enough froth is prepared. 3 Cappuccinatore Heating milk in the cappuccinatore Complete Cleaning Thorough cleaning is very important to prevent the cappuccinatore spout from becoming blocked and producing little or no froth. ^ Fill the cappuccinatore to the upper "Max" mark with cold milk, place the lid on, pull the spout out from the lid. ^ Slowly press the steam lever down and carefully "connect" the valve to the cappuccinatore. Quick cleaning For a quick cleaning between froths the cappuccinatore lid can be rinsed with the steam valve. The rinsing does not replace the cleaning of the cappuccinatore in a dishwasher. [. . . ] Be sure that the parts are assembled properly. 5 6 7 Alteration rights reserved / 4708 M. -Nr. 07 382 380 / 01 For the most updated manual see the Miele web site. [. . . ]